Main Features:

Complete front fork set by Lainer Suspension Racing.

EPICA Cartaridge System Inside,  Details below.

Outside:

• Aluminum CNC machined lugs, OEM KYB Kashima outer tubes, OEM KYB inner tubes with Lainer high performance DLC coating.

External adjustments:

• Compression damping – 60 clicks of sensitive adjustment– Adjustment at top of cartridge.
• Rebound damping – 50 clicks of sensitive adjustment– Located at fork bottom.
• External spring preload adjustment – 0 to 15mm– Easily adjusted with a 16mm socket at the fork bottom.

Innovative Features:

• Bladder System
• Our bladder system prevents performance loss that can occur with standard internal spring systems (due to hydraulic support decay).
• Internal oil compensation with increased volume for better high speed response.
• Ability to tune bladder pressures via the side bleed spring.
• EPICA cartridge incorporates Lainer’s Progressive Damping System (PDS) for increased hydraulic damping at the end stroke.
• PDS system has up to 12 different adjustments for the end stroke stiffness.
• High Speed compression piston is reversible with a large range of settings.

Technical Specs:

• Machined from premium 7075 and 6060 alloys and hard anodized.
• Reversible High Speed compression piston – outer diameter = 38 mm.
• Side A (Flat valve surface) – 34mm OD shims for motocross and enduro.
• Side B (Convex valve surface) – 32mm OD shims for supercross.
• Option to configure Low Speed Valve (LSV) on compression base valve.
• Cartridge rod diameter = 14 mm (for an increased oil flow).
• Rebound piston diameter = 25mm for better hydraulic control.
• Compression high/low speed shims ID 12 mm.
• Maximum travel = 310 mm.
• Maximum shim diameter for Mid-Valve By-pass = 21 mm.
• Ability to set Mid-Valve float clearance with the stack shims.
• Mid-Valve/By-pass floating shim ID = 6 mm (for a soft response at high speed on the braking bumps).
• Rebound shims ID = 6 mm (uses triangular mid-valve shims to avoid any oil turbulence on compression).
• Low friction NBR bottom seal.
• Ability to extend the cartridge through the nylon washers.

Fitment: 

• KTM SX-F 250/350/450  2016-2022
• KTM SX 125/150/250   2016-2022
• HUSQVARNA FC 250/350/450  2017-2022
• HUSQVARNA TC 125/250   2017-2022
• HUSQVARNA FS 450  2017-2022
• GAS GAS MC 125-250 2021-2022
• GAS GAS MC-F 250/450
• KTM EXC 125   2017-2022
• KTM EXC 150/250/300   2017-2022
• KTM EXC-F 250/350/450/500   2017-2022
• KTM EXC TPI Six Days 250/250F/350F/450F/500F   2017-2022
• HUSQVARNA FE 250/350/450/501  2018-2022
• HUSQVARNA TE 150/250/300  2018-2022